Power Conditioning UPS Protecting Agilent 6470 Triple Quad LCMS And Peak Nitrogen Generator
A Battery Backup Power, Inc. plug and play 10 kVA / 10,000 watt power conditioner, voltage regulator, & battery backup UPS with built in isolation transformer is seen in the photo below protecting an Agilent 6470 Triple Quad LCMS and Peak nitrogen generator at Washington University. The Battery Backup Power, Inc. 10kva plug and play UPS is compatible with Agilent LCMS, GCMS, GC, ICP-MS, and ICP-OES instruments.
Washington University had issues with voltage sags and power outages before it started using Battery Backup Power, Inc. laboratory power protection UPS systems with its lab instruments. After installing Battery Backup Power, Inc. UPS systems, the school was able to essentially eliminate service calls and downtime caused by burned out boards in instruments.
The school also had an issue where the facility power was at or below 208 volts while most of the instruments perform best at 230 volts. The BBP plug and play 6KVA and 10KVA UPS series have an integrated isolation transformer that ensures that the attached instrument(s) only get a stead 230 volts no matter what the facility voltage is.
Battery Backup Power, Inc. guarantees compatibility with its UPS systems for Agilent LCMS, GCMS, GC, ICP-MS, ICP-OES, or other instruments as long as the customer contacts BBP support before ordering so our team can pre-check that the correct UPS is ordered for the specific instrument. BBP support can be reached at (855) 330-7799 Option 3, by chat (lower right hand corner of this screen), or by email at engineering@batterybackuppower.com.
Alternatively, please see below for links to our most popular universally compatible systems.
Laboratory UPS For HPLC, UPLC, & UHPLC With Universal Plug And Play Compatibility With All Manufacturers: 3KVA Plug and Play
Laboratory UPS For LCMS (Without Nitrogen Generator), GCMS (Without Hydrogen Generator), & GC (Without Hydrogen Generator) With Universal Plug And Play Compatibility With All Manufacturers: 6KVA Plug and Play
Laboratory UPS For ICP-MS (With Chiller), ICP-OES (With Chiller), LCMS (With Nitrogen Generator**), GCMS (With Hydrogen Generator), & GC (With Hydrogen Generator)With Universal Plug And Play Compatibility With All Manufacturers: 10KVA Plug and Play
**Supports LNI Swissgas & Peak Nitrogen Generators